Your Complete Source For Barricade Warning Lights

We manufacture the highest quality warning light for use with traffic barricades, temporary marine markers and other applications.

Our goal is to manufacture the safest traffic control devices available. Our products help to reduce your liability, and are both environmentally and worker friendly.

All of our warning lights are manufactured with HDPE cases and Poly-carbonate lenses for long life.

Notable Features:

Notable features of our warning lights include:

• Standard photocell turns the light off to extend battery life. The photocell will only turn the light off when ambient light conditions are such that the light would not be visible to the observer.
• Standard rotary three-way switch with positions for Flash, Off, and Steady-Burn. In the Flash position the light will flash approximately once per second. When the switch is set to Steady-Burn the light does not flash and remains on until turned off by the photocell, or by the rotary switch. When the rotary switch is in the Off position (Center Position) the light remains off at all times.
• Proprietary pentagon head bolt and socket wrench. Our pentagon headed bolt provides theft deterance as it may only be turned with the supplied pentagon head socket wrench. The pentagon head socket wrench may attached to any standard 3/8" ratchet drive or speed-handle.
• Easy battery installation. The spring-type lantern batteries may be placed into the light case with any spring orientation as long as the springs are up. This eliminates the need for the batteries to be installed carefully to insure the correct battery placement.

We have three lenses configurations for our warning lights as follows:

Shown here is the standard 7" amber poly-carbonate lens mounted on a 7" poly-carbonate ring. The standard configuration is bi-directional and provides two lenses with one mounted on each side of the ring. An optional configuration replaces one of the lenses with a reflector to increase the light intensity for mono-directional configurations.

The third configuration utilizes a single 3" omni-directional dome lens.